Are you looking to upgrade your garden path, patio, or driveway with a sleek, modern finish? At Darlaston Builders Merchants (DBM DIY), we are seeing a massive surge in the popularity of Resin Bound surfacing.
In the past, achieving that "luxury hotel" driveway look required expensive heavy machinery and specialist contractors. However, with the latest DIY Resin Bound Kits, homeowners and trade professionals alike can achieve a seamless, permeable, and durable finish with ease.
What is a Resin Bound Kit?
A Resin Bound Kit is a pre-measured system consisting of high-quality clear resin and specialized kiln-dried aggregates (stones). Unlike "Resin Bonded" systems (where stone is scattered over glue), Resin Bound involves mixing the two together before application. This creates a smooth, porous surface that allows water to drain through, making it fully SUDS (Sustainable Urban Drainage Systems) compliant.
Watch: How to Apply a DIY Resin Bound Kit
To see exactly how straightforward the process is, watch this expert demonstration from Polybound:
https://www.youtube.com/watch?v=nL-9NyRLVJ4
Step-by-Step: How to Use Your Resin Bound Kit
According to the expert guide in the video, achieving a professional-grade finish comes down to preparation and timing. Here is the breakdown:
1. Preparation is Key [00:32]
Before you open your kit, ensure your surface is:
-
Clean and Dry: Any moisture can react with the resin.
-
Level and Solid: A stable base (like concrete or tarmac) is essential to prevent future cracking.
2. The Mixing Process [00:41]
-
Combine Resins: Pour the two resin components together and mix using a paddle mixer for at least 2 minutes [00:52].
-
Add the Stone: Empty your stones into a large mixing bucket, add the combined resin, and mix for a further 3 to 5 minutes until every stone is evenly coated [01:13].
3. Application and Levelling [01:28]
-
Pour the mixture onto your pathway, starting at one edge and working across.
-
Trowel Technique: Hold your trowel at a slight angle and use smooth, sweeping motions to spread the mixture evenly [01:45].
-
Work in Sections: To prevent the resin from hardening before you've finished, work in small, manageable areas [02:01].
4. Curing Time [02:09]
Your new surface will typically need 24 to 48 hours to fully cure, depending on the weather. Avoid walking or driving on it during this period to ensure the finish remains flawless.
Why Choose a Resin Bound Kit from DBM DIY?
As your leading Walsall Builders Merchant, Darlaston Builders Merchants provides trade-quality kits that offer several benefits over traditional paving:
-
No Specialist Skills Needed: As shown in the video, if you can use a trowel and a mixer, you can achieve a professional result [00:16].
-
Weed Resistant: Because the resin encapsulates the stone, weeds find it incredibly difficult to take root.
-
Aesthetic Variety: Available in a range of colors, from contemporary greys to classic golden quartz.
-
Low Maintenance: A simple power wash once a year is usually all it takes to keep it looking brand new.
Get Your Project Started
Ready to upgrade your outdoor space? Visit dbmdiy.com or drop by our Walsall or Darlaston depots to pick up your Resin Bound Kit, paddle mixers, and trowels.
